1.
Timber Dome Project
This project was crafted from kiln-dried Douglas Fir, carefully selected for its exceptional appearance and strength. Each piece met or exceeded Select Structural grade, with a ...
Paul Cochran
15 October, 2025
Mill Rough
Bandsaw finished directly from the mill, no further finish required. It's a rougher texture and size can vary +/- 1/8 inch. Marks from the processing and handling could be visible. When you want a more "rustic finish" this should be your choice.
Surfaced four Sides
This finish is a planned or surfaced finish, (not sanded) and accurately sizes the timber at the time it goes through the planer. Maximum size we can surface is 24" x 24". Note that after surfacing timber will shrink depending on the climate and the moisture content of the timber over a period of time.
Resawn Rough
This finish is a finer rough texture done after the timber has been cut by the mill in order to size the timber to the size required, and clean up any marks from the handling process of the mill or dry kiln. Timbers can be resawn either from green timber, but mostly we do it after the timber has been kiln dry.
Circle Sawn
This finish is achieved for cutting with a large circle saw sawmill cut directly from the mill. Similar to Mill Rough, it is a rougher texture and can very in size +/- 1/4 inch. Marks from handling at the mill will be visable and add to the rustic appearance of the timber.
RECENT PROJECTS
2.
Homestead Timber Frames
These projects feature our Green and Kiln Dry Douglas Fir S4S 1btr FOHC and Select Structural timbers. These projects have timbers as big as 6×20 42 feet long and 10×16 32 feet ...
Admin
6 March, 2019
3.
Gunnstock Timber Frames
Gunnstock Timber Frames This project features our Western Larch 1btr surfaced timbers, from 3×8 to 10×16 26 feet long, built by Chris Gunn, and designed by Laura Viklund of ...
Admin
6 March, 2019
4.
Kiln Drying
Admin
6 March, 2019
5.
Timbers
Admin
6 March, 2019
